Volume 15, Issue 2 (2015)
MJEE 2015, 15(2): 14-20 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Khosrogorji S, Soori S, Pourgholi M. Minimization of the switching losses in high power induction furnaces using an analog state feedback controller. MJEE 2015; 15 (2) :14-20
URL: http://mjee.modares.ac.ir/article-17-5264-en.html
URL: http://mjee.modares.ac.ir/article-17-5264-en.html
1- دانشجوی کارشناسی ارشد- دانشگاه شهید بهشتی، دانشکده مهندسی برق، گروه کنترل
2- Department of Electrical and Computer Engineering, Shahid Beheshti University, Tehran, Iran
2- Department of Electrical and Computer Engineering, Shahid Beheshti University, Tehran, Iran
Abstract: (4944 Views)
Due to the high efficiency and low switching losses of resonant power convertors in comparison with switching convertors, nowadays there is a growing trend towards these convertors. However, because of the high frequency of switching in such convertors, it is quite difficult to present an efficient control method. In this paper, based on the state feedback method and using pole placement technique a control strategy is developed which controlling delay time in the converter’s switching to minimize losses in the induction and hardening furnaces. In the propose method, the input voltage is isolated from output load. Moreover, fewer number of elements are employed in the control circuit which will be caused lower costs and small dimensions for control system. As a result, the proposed controller is more economical in comparison with the conventional ones. To show the effectiveness of propose controller, simulation circuits using PSIM software and an experimental setup are provided and the results are reported
Received: 2016/08/20 | Accepted: 2016/09/18 | Published: 2038/01/19
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |