Volume 13, Issue 3 (2013)                   MJEE 2013, 13(3): 35-39 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Hosseini S M, Tali S A S, Sanaee Z. Carbon Nanotubes on ITO/Silicon Substrate for Fabrication of Silicon Based Lithium Ion Battery. MJEE. 13 (3) :35-39
URL: http://mjee.modares.ac.ir/article-17-11459-en.html
1- Nano-fabricated Energy Devices Laboratory, School of Electrical and Computer Engineering, College of Engineering, University of Tehran, Tehran, Iran.
2- Nano-fabricated Energy Devices Laboratory, School of Electrical and Computer Engineering, College of Engineering, University of Tehran, Tehran, Iran
Abstract:   (3908 Views)
Carbon nano tubes are currently used in many modern devices for the improvement they can cause in different applications due to their unique properties. Especially in Lithium ion batteries that are today`s most common rechargeable batteries, CNTs have been utilized and offered certain advantages over commercial electrodes. Here we report utilizing carbon nanotubes grown on a silicon wafer with an ITO barrier layer, as the anode of a Lithium ion battery. CNTs with the average thickness of 90 nm and density of 14.5×108 cm-2 have been grown on the surface of the sample and used as the battery electrode. Fabrication of batteries on silicon wafer makes possible the integration of functional devices along with the power source on the same wafer, which is a considerable advantage. Surface of the sample remained intact after several charge and discharge processes, which is a very critical feature in lithium ion batteries based on silicon. High columbic efficiency of 98% and specific capacity of 0.08 mAh/cm2 was achieved after 8 cycles for our structure.  
Full-Text [PDF 144 kb]   (1931 Downloads)    

Received: 2014/10/6 | Accepted: 2013/08/23 | Published: 2016/01/6

Add your comments about this article : Your username or Email:
CAPTCHA