Volume 2, Issue 1 (2002)
MJEE 2002, 2(1): 105-114 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
JOUHARI MAJD V, HASANZADEGAN H. A NEW METHOD FOR TOOL-PATH GENERATION AND ADAPTIVE INTERPOLATION OF A THREE-AXIS CNC MILLING MACHINE. MJEE 2002; 2 (1) :105-114
URL: http://mjee.modares.ac.ir/article-17-1670-en.html
URL: http://mjee.modares.ac.ir/article-17-1670-en.html
A NEW METHOD FOR TOOL-PATH GENERATION AND ADAPTIVE INTERPOLATION OF A THREE-AXIS CNC MILLING MACHINE
1- Tarbiat Modarres University
Abstract: (3783 Views)
In this paper we present a new method for tool-path generation and adaptive interpolation for a three-axis CNC milling machine. This method satisfied the force and / or the error conditions by using a variable-direction variable-feedrate strategy based on Maximum Feedrate Map. The proposed adaptive interpolator modifies the cutting path and the moving direction according to the actual instantaneous position error in real time. It also adaptively slows down the speed of the cutting tool if the position error exceeds a permissible threshold so as to decrease the error. As the cutting points on the spline at each cycle are not calculated beforehand, memory requirement for the interpolator drastically reduces. The significance of the proposed method on the reduction of the cutting error in the presence of disturbance is demonstrated via computer simulations.
Received: 2010/10/3 | Accepted: 2010/10/3 | Published: 2010/10/3
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |